Filter membrane RESPILON AIR - FAKRO

Filter membrane RESPILON AIR®

Filter membrane RESPILON AIR®


FAKRO are able to offer the frames as “made to measure” to suit the overall size of the windows. It is also possible to offer the installer the option of having the frame profiles with the membrane supplied loose in the roll for DIY installations.

The RESPILONAIR® membrane is available in rolls that are 140cm in width and 100m in length, or in pieces cut to length by the m2.


Find out more about cleanAir products


Fabric technical data

Dust protection: Fabric technical data
Composition: Mesh: polypropylene, polyester
Nanofi bre layer: polyvinylidene fl uoride
Weight: 121.6 g/m2
Thickness: 0.58 mm
Air permeability: Air permeability: ~ 20%*
Protection against overheating (solar factor): g tot=0,67-0,126**
Improvement in window thermal performance ~ 9%
Warranty 2 years
Cleaning & Maintenance:

- Use a vacuum cleaner or low level compressed air to remove dust and dirt;
- Wash with soft sponge and warm water (max 35°C) with soap (or special agents for PVC), rinse with clean water;
- Do not scrub with sharp and abrasive objects;
- Once cleaned, allow the fabric to dry before use;
- Do not use high pressure washer or aggressive cleaning agents/solvents/ alcohol/petrol etc.

* Over time the membrane becomes tighter and captures more dust particles, while its air permeability decreases.
When cleaning not all dust is removed but the air permeability is improved.
** Based on comparison with the awning blind’s fabric featuring similar parameters, range for diff erent types of glazing (this means that a minimum of 90% of solar energy is stopped by the membrane).
*** Dependent on the usage conditions (after this time it is recommended to replace the membrane).