Metal folding section loft ladders

Fire Rated Loft Ladders

LMF 60
- plastic ends
- fire resistant white hatch
- 3 peripheral seals
- non-slip metal steps
- handrail (10'1” max. ceiling ladders)
- ladder unloading mechanism, built in handrail
- additional accessories available
- intended for installation with high ceilings
- 2 year warranty
LMF 60
- 158kg maximum loading 7cm insulation thickness 8.3cm hatch thickness 60 minutes in accordance with ASTM E119-14 and NFPA 288 norm requirements 8.9 attic ladder R-value
The LMF60 model is a new generation attic ladder that provides access to unused space in the attic and at the same time functions as a fire protection for 60 minutes (1 hour rating in accordance with NFPA 288 and ASTM E119-14.)
LWF 60
- stile ends
- fire resistant white hatch
- 3 peripheral seals
- non-slip threads set flush with ladders strings
- handrail
- additional accessories available
- 3 year warranty
LWF
- 160 kg maximum loading U=0.9 W/m²K loft ladder hatch U-value 7.9cm insulation thickness 8.5cm hatch thickness EN 14975 norm requirements
The LWF 60 loft ladder is a new generation that perfectly combines the high level of fire-protection with comfortable and safe access to attic space. Fire-resistance classification LWF 60 El₁/ EI₂=60 min wg EN 13501-2.
LSF
- fire-resistant hatch
- finishing lining slats
- non-slip treads
- possibility of adding or detaching segments
- system of quick installation in the ceiling
- possibility of installing additionl accessories
- system of adopting the ladder length to the ceiling height
- 3 year warranty
LSF
- 200 kg maximum loading - loft ladder hatch U-value 3 cm insulation thickness 5.4 cm hatch thickness EN 14975 norm requirements
The LSF fire-resistant loft ladder acts as a smoke block inside the building preventing the smoke from passing to a smoke free storey. The loft ladder fireresistance is EI₂= 60 minutes (classification according to EN 13501-2).
DWF
- ready for quick installation
- Fire classification as per EN 13501:2 - EI145
- 3 year warranty
DWF
- U=0.64 W/m²K loft ladder hatch U-value 6 cm insulation thickness
The DWF fire-resistant L-shaped combination doors are intended primarily for installation in vertical walls. These doors ensure access to non-habitable rooms located behind vertical wall as well as protect for 45 minutes against the spread of fire (classification as per EN13501 – EI₁45). The DWF L-shaped combination doors are universal, hence they can be installed with left as well as right direction of opening. Sash with a thickness of 6.6.cm made of pinewood veneered on both sides with HDF board in white filled with mineral
wool