EPV flashing is ideal for a flush fit between windows and heavy tiled roof coverings such as: shingles. It can be applied to roof coverings of up to 24 - 32 mm (2 x 12 - 16 mm) thickness.
It is applied to individual windows in the slope of the roof. A series of window units may also be combined. Only one flashing is available, allowing the installation of windows at a level V (0 cm) – EPV flashing.
Can be used in a range of installations in roofs with pitches between 25°and 90°
|
Constituents of the flashing: This flashing is made up of lower, upper and side elements, dimensions of which are dependent on window height. The profiled side elements of the flashing are laid alternately with the roof covering, fitting tightly with it. The first two modular side elements are made from soft sheeting which allows it to flex and fit to the profile of the roof covering. The lower element has a PVC fill et glued to the underside, which allows easy and secure connection to profiled roof covering. A weep flap allows condensation to drain away from the window. |
 |
|
Flashing parts:
|
|
||||||||||||
  
|
|
|||||||||||
|
|
||||||||||||
